Panasonic KX-NS300CN, Pc Programming Manual

Page: 610 / 884

Enable (Get DISA): Trunk-to-public trunk calls are established using DISA, and DISA can be used to detect
the end of the call.
PC Programming Manual References
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—Option 1— CO-CO
with DISA—DISA to Public CO
CO-CO with DISA—Fwd/Transfer to Private Network
Enables trunk-to-private trunk calls to be established using DISA.
Value Range
Disable: Trunk-to-private trunk calls are established without using DISA.
Enable (Get DISA): Trunk-to-private trunk calls are established using DISA, and DISA can be used to detect
the end of the call.
PC Programming Manual References
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—Option 1— CO-CO
with DISA—DISA to Private Network
CO-CO with DISA—Transfer by DTMF "#" (Activation Key Required)
Specifies whether an outside party such as a cellular phone can transfer a trunk call to an extension within the
PBX by dialling "#" + extension number.
Value Range
Disable: "#" is ignored if dialled.
Enable (as "Flash"): The current trunk call will be placed on hold, then transferred to the extension whose
number is entered.
CO-CO with DISA—Return to DISA Top Menu by DTMF "*"
Enables a trunk caller to return to the DISA top menu by pressing " " while hearing a ringback, reorder, or
busy tone. If disabled, retrying the call is possible by pressing " ".
Value Range
Disable, Enable
Option 2
DISA Cyclic Tone Detection
Selects the cyclic tone detection mode. Cyclic tone detection is used to determine the end of a call for a DISA
trunk-to-trunk conversation established through an analogue trunk.
This setting is only available when DPS cards are not installed.
610 PC Programming Manual
13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System