Panasonic KX-NS300CN, Pc Programming Manual

Page: 582 / 884

12.2.3 PBX Configuration—[4-2-3] Extension—Portable
Station—Flexible Button
Each flexible button can be customised to allow one-touch access to a certain feature. A maximum of 12 flexible
buttons can be customised for each PS. Select the desired PS from the
Extension Number / Name list.
To copy values from one location to another, click the Copy to button.
For more information on flexible buttons, see "2.21.2 Flexible Buttons" in the Feature Guide.
Type
Specifies the feature to be assigned to the flexible button.
Value Range
Not Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/DND
(Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External), Group Fwd
(Internal), Account, Conference, Terminate, EFA, Charge, Call Park, Log-in/Log-out, Hurry-up, Wrap-up, Time
Service, TRS Level Change, ISDN Service, CLIR, COLR, ISDN Hold, Time Service - Automatic/Manual,
Two-way Record, Two-way Transfer, LCS, Voice Mail Transfer, NDSS, CTI, PDN, SDN
PC Programming Manual References
12.2.3.1 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button—Flexible button data copy
Parameter Selection (for Single CO)
Specifies the trunk to be accessed.
Value Range
1–142
Feature Guide References
2.5.5.3 Trunk Access
Parameter Selection (for Group CO)
Specifies the trunk group to be accessed.
Value Range
1–64
Feature Guide References
2.5.5.3 Trunk Access
Parameter Selection (for Call Park)
Specifies whether a call is parked in an idle parking zone automatically, or in a specific parking zone.
Value Range
Automatic, Specific
582 PC Programming Manual
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button