Panasonic KX-NS300CN, Pc Programming Manual

Page: 550 / 884

Value Range
Max. 12 characters
Feature Guide References
2.21.2 Flexible Buttons
Optional Parameter (Ringing Tone Type Number) (for Time Service)
Specifies the Time Table to be used for changing time modes in the Automatic Switching mode.
Value Range
Table 1–Table 8
Feature Guide References
5.1.4 Time Service
Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO,
Group CO, ICD Group, SDN)
Specifies the ring tone type.
Value Range
IP-PT (except KX-NT265/KX-NT321): 1–30
KX-NT265/KX-NT321: 1–8 (Even if ring tone 9–30 is selected, ring tone 1 is heard.)
S-PS: Not available.
Other telephones: 1–8 (Even if ring tone 9–30 is selected, ring tone 2 is heard.)
Optional Parameter (Ringing Tone Type Number) (for Call Park)
Specifies the number of the parking zone a call is to be parked in when a Call Park button with Parameter
Selection (for Call Park) on this screen set to Specific is pressed.
Value Range
Park 00–Park 99
Feature Guide References
2.13.2 Call Park
Ext No. of Mailbox (for Two-way Transfer)
Specifies the number of the extension whose mailbox will be used to record conversations using One-touch
Two-way Transfer. (For example, a secretary can record a conversation into the mailbox of a boss.) If the cell
is left empty, the extension user must specify the number of an extension each time.
Value Range
Max. 5 digits (consisting of 0–9)
550 PC Programming Manual
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button