Panasonic KX-NS300CN, Pc Programming Manual

Page: 326 / 884

9.27 PBX Configuration—[1-1]
Configuration—Slot—Card Property—E1 type
The properties of the E1 card can be specified.
To adjust related settings, click Line Signal Setting, MFC-R2 Setting 1, and MFC-R2 Setting 2.
Line Coding
Selects the line coding type of E1 PCM (Pulse Code Modulation) for the E1 card.
Value Range
HDB3, AMI
Frame Sequence
Selects the type of frame sequence for the E1 card.
Value Range
PCM30, PCM30-CRC
Frame Option
Selects the value for C-bit and D-bit.
Value Range
C=A, D=B; C=0, D=0; C=0, D=1; C=1, D=0; C=1, D=1
First Dial Timer (TIE)
Specifies the minimum time that the PBX waits after seizing a DDI/DID or TIE line, before sending the dialled
digits to the telephone company or to another PBX. This allows the telephone company or the other PBX to
have enough time to accept the dialled digits correctly..
Value Range
32 x n (n=1–255) ms
Answer Detection Timer
Specifies the length of time required by the PBX to recognise the answer signal. This allows the telephone
company to have enough time to accept the dialled digits correctly.
Value Range
32 x n (n=1–255) ms
Seizure ACK Wait Timer
Specifies the length of time that the PBX waits for the seizure ACK signal.
Value Range
0.5 x n (n=1–20) s
326 PC Programming Manual
9.27 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type