Panasonic KX-NS300CN, Pc Programming Manual

Page: 32 / 884

2.1 Introduction
2.1.1 Web Maintenance Console Accounts
User account levels
Access to Web Maintenance Console requires a login name and password, which are assigned to accounts
in the PBX. Also, access to Web Maintenance Console is controlled by different levels of authorisation. The
Installer level is the highest authorisation level. There are also two levels for end users, Administrators and
Users. The usage for each level and number of accounts available for each level are as follows:
Level Description Number of Accounts
Installer For dealers and system installers 1
User
(Administrator) For on-site managers 8
User (User) For end users 492
Differences between user levels
•
Installer
The installer level account is the highest authorisation account of the three levels. This account level is to
be used by dealers or system installers. All system programming settings are available, and this account
is used for overall system installation and maintenance. The installer level can be used to programme
which menus in Web Maintenance Console are accessible by Administrator accounts.
•
User (Administrator)
Administrator accounts are for general maintenance of users and user settings. This account level is used
by on-site managers and network administrators. Administrator level accounts can use Web Maintenance
Console to add users or programme user settings.
User (Administrator) accounts are intended for maintenance functions only. To manage their own PBX
user settings, on-site managers and network administrators should create their own User (User) accounts
for programming.
•
User (User)
User accounts are for individual users of the PBX system. Users can use Web Maintenance Console to
change their extension settings, speed dial settings, or other personal settings by accessing a limited
number of pre-defined menus.
Note
•
User (User) accounts cannot be used when programming in Off-line mode. For details, refer to
1.2.2 PC Programming Using Off-line Mode .
Account Login Names and Passwords
Each account has a login name and password and are specified as follows. All account passwords are set in
Web Maintenance Console (see
8.2.1 Users—Add User—Single User ).
32 PC Programming Manual
2.1.1 Web Maintenance Console Accounts