Panasonic KX-NS300 Pc Programming Manual Download | Manualshive

Page: 91 / 752

background image

6.10 Tool—UM Data Restore

Follow the procedure below to restore data backed up using the UM Data Backup tool.
This screen can be accessed only in On-line mode.
For more information about the UM Data Backup tool, see

6.9 Tool—UM Data Backup

. You can restore

data from a USB memory device connected to the PBX or from a file on your local PC.

1.

Select the check boxes of the items to restore.

2.

In

System Restore

, select

Local PC

or

USB Flash Drive (Main Unit)

.

•

Local PC

Click

Browse

and select a backup file from your local PC. The file must have been saved using the

UM Data Backup tool.

•

USB Flash Drive (Main Unit)

When

USB Flash Drive (Main Unit)

is selected, the folder selection menu becomes active. Specify

the folder on the USB memory device where the backup data is saved.

•

NAS

When

NAS

is selected, the folder selection menu becomes active. Specify the folder on the NAS

where the backup data is saved.

Note

Before selecting

USB Flash Drive (Main Unit)

, make sure that the USB memory device with the

backup data is connected to the Main unit.

To restore a single file:

Files that match the selected types of items to restore will be highlighted.
Click a file in the list to display its name in the text box. You can also click a folder name to display that
folder’s contents, and then click a file to select it.

To restore multiple files at once:

Folders whose contents match the selected types of items to restore will be highlighted.
Click a folder in the list to display its name in the text box. You can also click a folder name to display
that folder’s contents, and then click a folder to select it.

Note

When restoring data from a local PC, up to 40 files can be selected at one time. When there are a
large number of files to restore, they should be restored from the folder on the USB memory
device.

3.

Click

OK

to restore the selected file or folder of files.

•

Local PC

The results of the data restore will be downloaded from the PBX as a text file called
"UM_data_restore_result.txt". Save the file to your local PC to view its contents.

•

USB Flash Drive (Main Unit)

The results of the data restore will be saved in a text file called "UM_data_restore_result.txt" on the
USB memory device. To view this file, you must connect the USB memory device to a PC and then
open the text file.

•

NAS

The results of the data restore will be saved in a text file called "UM_data_restore_result.txt" on the
NAS. To view this file, you must connect to the NAS and copy to a PC and then open the text file.

6.10 Tool—UM Data Restore

PC Programming Manual

91

«
...
89
90
91
92
93
...
»

Summary of Contents for KX-NS300

















































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-NS300

Brand: Panasonic Pages: 376

Brand: Panasonic Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands