Panasonic KX-NS300, Pc Programming Manual

Page: 496 / 752

14.1 PBX Configuration—[6-1] Feature—System
Speed Dial
The System Speed Dialling Table is used to store frequently dialled numbers as well as callers who should
be automatically routed to certain extensions when they call (Calling Line Identification [CLI] distribution).
The System Speed Dialling Table is available for all extension users when making or receiving a call.
In Basic Memory, a maximum of 1000 System Speed Dialling numbers (e.g., telephone numbers, feature
numbers) can be programmed with other related parameters. 100 numbers are displayed at a time. To
display other sets of numbers, click the applicable tab.
Name Description Value Range Links
Select Table Selects the System Speed
Dialling Table to be
programmed. Whether a tenant
uses the basic System Speed
Dialling Table or the additional
table depends on the setting of
System Speed Dial in
14.6 PBX Configuration—
[6-6] Feature—Tenant
.
System: the
standard table
Expansion for
Tenant 1-8:
additional tables PC Programming Manual
References
14.6 PBX Configuration—[6-6]
Feature—Tenant—System Speed
Dial
Feature Manual References
2.6.4 Speed Dialling—Personal/
System
2.19.1 Caller ID
5.1.3 Tenant Service
Name Specifies a name for the
System Speed Dialling number. Max. 20
characters Feature Manual References
2.6.4 Speed Dialling—Personal/
System
2.19.1 Caller ID
CO Line
Access
Telephone
Number Specifies the telephone number
(including the Trunk Access
number) or feature number
assigned to the System Speed
Dialling number. Max. 32 digits
(consisting of 0–
9, *, #, T
[Transfer], [ ]
[Secret], P
[Pause], and F
[Flash])
Feature Manual References
2.6.4 Speed Dialling—Personal/
System
2.19.1 Caller ID
CLI
Destination Specifies the CLI destination
(extension) to which incoming
calls from the programmed
telephone number are routed. If
a Caller ID Modification Table is
being used, the modified
number must match the
telephone number above (
CO
Line Access
Telephone Number
) in order
for the call to be routed
correctly.
Max. 5 digits
(consisting of 0–
9) PC Programming Manual
References
18.2 PBX Configuration—[10-2] CO
& Incoming Call—DIL Table & Port
Settings—CLI for DIL—CLI Ring for
DIL—Day, Lunch, Break, Night
18.3 PBX Configuration—[10-3] CO
& Incoming Call—DDI / DID Table
—CLI Ring for DDI/DID—Day,
Lunch, Break, Night
Feature Manual References
2.1.1.5 Calling Line Identification
(CLI) Distribution
2.19.1 Caller ID
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
496 PC Programming Manual