Panasonic KX-NS300, Pc Programming Manual

Page: 450 / 752

Name Description
Value
Range
Links
Destination
Extension
Line Select the number and name of the extension
that will receive the copied settings. Multiple
extensions can be selected. To select all
extensions at once, click
Select All .
When selecting multiple extensions, note that if
the source extension has an SDN button, the
copy operation cannot be performed.
PC Programming
Manual References
12.1.4 PBX Configuration—
[4-1-4] Extension—Wired
Extension—Flexible Button
12.1.5 PBX Configuration—[4-1-5] Extension—Wired Extension
—PF Button
Each Programmable Feature (PF) button can be customised to access a certain feature with one touch. A
maximum of 12 PF buttons can be customised for each extension. Select the desired extension from the
Extension Number / Name list.
Name Description Value Range Links
Type Specifies whether to store a
dialling number for the one-
touch access. Not Stored, One Touch Feature Manual
References
2.21.2 Flexible Buttons
Dial Specifies the number to be
dialled. Max. 32 digits (consisting of 0–9,
*, #, T [Transfer], [ ] [Secret], P
[Pause], and F [Flash]) Feature Manual
References
2.21.2 Flexible Buttons
12.1.6 PBX Configuration—[4-1-6] Extension—Wired Extension
—NDSS Link Data - Send
It is possible to cancel the transmission of an extension’s status data over the network. Select the desired
extension from the
Extension Number / Name list.
This screen can be accessed only in On-line mode.
Name Description
Value
Range
Links
Network BLF Data
to NDSS Key of
Other PBX - Other
PBX (Network
PBX ID=1) Selects whether extension status data
is transmitted over the network for the
selected extension. This setting is
automatically set to
ON when the
feature is used, and can only be
manually changed from
ON to OFF , to
cancel data transmission.
OFF, ON
PC Programming Manual
References
17.1 PBX Configuration—[9-1]
Private Network—TIE Table
Feature Manual
References
4.3.5.1 Network Direct Station
Selection (NDSS)
12.1.7 PBX Configuration—[4-1-7] Extension—Wired Extension
—CLIP ID Table
Up to 8 CLIP IDs can be set for each wired extension.
12.1.5 PBX Configuration—[4-1-5] Extension—Wired Extension—PF Button
450 PC Programming Manual