Panasonic KX-NS300, Pc Programming Manual

Page: 300 / 752

9.34 PBX Configuration—[1-1] Configuration—Slot
—Card Property—DOORPHONE Card
The doorphone card’s settings can be programmed.
The
Shelf , Slot , and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot .
Name Description Value Range Links
Port Status Specifies the port’s status.
This option is only available in On-line
mode. INS: The port is in service.
OUS: The port is out of
service.
Fault: There is a
communication error.
For Output - Device
Type Selects the type of connected output
device (for output ports only). Ringer, Relay, Door Opener
For Sensor - Input
Signal Decision Time Specifies the minimum duration of
continuous input from the triggered
sensor before the PBX recognises the
input and makes a sensor call. 32 × n (n=2–255) ms
For Sensor - Input
Signal Detection
Reopening Time Specifies the length of time after the
sensor has been triggered during which
any further input from the sensor will be
ignored. 10 × n (n=1–255) s
9.34 PBX Configuration—[1-1] Configuration—Slot—Card Property—DOORPHONE Card
300 PC Programming Manual