Panasonic KX-NS300, Pc Programming Manual

Page: 288 / 752

9.28 PBX Configuration—[1-1] Configuration—Slot
—Card Property—E1 type
The properties of the E1 card can be specified.
To adjust related settings, click Line Signal Setting, MFC-R2 Setting 1, and MFC-R2 Setting 2.
Name Description Value Range Links
Line Coding Selects the line coding type of E1 PCM (Pulse
Code Modulation) for the E1 card. HDB3, AMI
Frame Sequence Selects the type of frame sequence for the E1
card. PCM30, PCM30-CRC
Frame Option Selects the value for C-bit and D-bit. C=A, D=B; C=0, D=0;
C=0, D=1; C=1, D=0;
C=1, D=1
First Dial Timer
(TIE) Specifies the minimum time that the PBX waits
after seizing a DDI/DID or TIE line, before
sending the dialled digits to the telephone
company or to another PBX. This allows the
telephone company or the other PBX to have
enough time to accept the dialled digits correctly. 32 x n (n=1–255) ms
Answer
Detection Timer Specifies the length of time required by the PBX
to recognise the answer signal. This allows the
telephone company to have enough time to
accept the dialled digits correctly. 32 x n (n=1–255) ms
Seizure ACK
Wait Timer Specifies the length of time that the PBX waits for
the seizure ACK signal. 0.5 x n (n=1–20) s
LIU Send Option Indicates the transmitting level (Transmit Pulse
Amplitude) of LIU (reference only). Mode 1-Mode 8
LIU Receive
Option Selects the receiving level (Receive Equalisation)
of LIU. Automatic, 6 dB, 12 dB,
18 dB, 24 dB
RAI Signal
Detection Mode Selects the RAI signal detection mode. Type1, Type2
DTMF Tone—
DTMF Inter-digit
Pause Specifies the length of the DTMF inter-digit
pause. 64 + 16 x n (n=0–11)
ms
9.28 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type
288 PC Programming Manual