Panasonic KX-NS300, Pc Programming Manual

Page: 280 / 752

Name Description Value Range Links
CRC4 Mode Enables the use of CRC4 for error
checking. CRC (Cyclic Redundancy
Check) is an error checking control
technique that uses a specific binary
prime divisor that results in a unique
remainder. It is usually a 16- to 32-bit
character. (Assignable only when using
the PRI30 card.) Disable, Enable
Line Coding Selects the line coding type of the PRI
PCM (Pulse Code Modulation) for the
port. This setting is only available when
using the PRI23 card. B8ZS, AMI
Frame
Sequence Selects the type of frame sequence for
the port. This setting is only available
when using the PRI23 card. Extended Multi frame
(ESF), 4-Frame Multi frame
(F4), 12-Frame Multi frame
(F12)
CO Setting
CO Setting parameters are not applicable to ports assigned as Extension in Port Type .
The Shelf , Slot , and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot .
Name Description Value Range Links
Port Type Selects the port type.
Note
•
Each ISDN connection in
a QSIG network must
have a master port on
one PBX and a slave port
on another PBX.
•
ISDN extensions can
belong to an incoming
call distribution group or
idle extension hunting
group. In this case, an
MSN can be assigned.
CO: For connecting to
public network
Extension: For
connecting to extension
QSIG-Slave: For
connecting to private
network (slave port)
QSIG-Master: For
connecting to private
network (master port)
Connection Indicates the port status. To
change the status of the port,
click the desired cell in the
column, and then select
INS or
OUS for the port.
This option is only available in
On-line mode.
INS: The port is in
service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
280 PC Programming Manual