Panasonic KX-NS300, Pc Programming Manual

Page: 197 / 752

9.8 PBX Configuration—[1-1] Configuration—Slot—
Shelf Property—V-SIPGW
Common settings for all of the V-SIPGW cards installed in the Virtual Shelf can be programmed.
Icon Description
In this section, the following icons show the different parameter type.
Icon Description for Parameter Type
Manual programming is compulsory under certain conditions.
Manual programming is optional.
Main
Name Description Value Range Links
SIP Client
Port Number
Specifies the port number of the PBX used
for communications with the SIP server. 1024–65535
SIP Called
Party Number
Check Ability
Specifies whether to receive a SIP trunk
call when receiving the INVITE message
with an incorrect target SIP-URI. The
setting specified here is also applied when
the request header is blank or contains
characters that cannot be modified to a
receivable number. Disable (High->Low), Disable
(Low->High), Enable
SIP Called
Party Number
Search Mode
Specifies the search mode for the notified
SIP Called Party Number information. Mode 1 : Searches SIP
accounts only.
Mode 2 : Searches SIP
accounts, then DDI/DID
numbers. Searches the SIP
trunks of the tenant of the
search-matched DDI/DID
number, in ascending order
(Low → High).
Mode 3 : Searches SIP
accounts, then DDI/DID
numbers. Searches the SIP
trunks of the tenant of the
search-matched DDI/DID
number, in descending order
(High → Low).
Symmetric
Response
Routing Ability
Enables this feature to request that the
SIP server sends the response back to the
source IP address and port from which the
request originated. Disable, Enable
9.8 PBX Configuration—[1-1] Configuration—Slot—Shelf Property—V-SIPGW
PC Programming Manual 197