Panasonic KX-NS300, Installation Manual

Page: 169 / 300

3.
Click .
The Edit User screen will be displayed.
4.
Select the preferred language in Change Language .
5.
Click OK .
The screen will redisplay in the selected language immediately.
5.4.2 Enabling the DHCP Server Feature
This PBX is equipped with a DHCP Server feature. When the feature is enabled, it allows you to centrally
manage and automate the assignment of IP addresses for the devices located in same LAN using Web
Maintenance Console.
1. Click Setup
®
Network Service
®
Server Feature
®
DHCP .
2. On the DHCP Server tab, select Enable for DHCP
Server .
3. Enter valid settings for the IP address auto
assignment .
Note
For details about IP address auto assignment
settings, refer to "27.2.1 Network Service—[2-1]
Server Feature—DHCP" in the PC Programming
Manual.
4. Click OK .
Note
If an external DHCP server is in use, do not enable the DHCP Server feature. Doing so may allocate
inappropriate IP addressing information to the devices.
5.4.3 Installing the Virtual IP Cards to the PBX
1.
Click Setup
®
PBX Configuration
®
Configuration
®
Slot .
2. Place the mouse cursor over the Virtual Slot , and in the
menu that appears, click Select Shelf .
3. Click on the name of the virtual card to install in the list
on the right. An image of the virtual card will be displayed
to the left of the list, and information about the card will
be shown below.
4. Click and drag the image of the virtual card to the free
virtual slot it is to be installed in, and release it. The virtual
card will move into the slot space.
5. Click OK to confirm.
Installation Manual 169
5.4.3 Installing the Virtual IP Cards to the PBX