Panasonic KX-NS300 Features Manual Download

Page: 16 / 580

1.1 For Your Safety

1.1.1 For Your Safety

Description

To prevent personal injury and/or damage to property, be sure to observe the following safety precautions.

The following symbols classify and describe the level of hazard and injury caused when this unit is
operated or handled improperly.

CAUTION

This notice means that misuse could result in injury
or damage to property.

The following types of symbols are used to classify and describe the type of instructions to be
observed.

This symbol is used to alert users to a specific operating procedure that must be followed in
order to operate the unit safely.

Feature Guide

1.1.1 For Your Safety

Summary of Contents for KX-NS300





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-NS300

Reviews:

Related manuals for KX-NS300

Brands by name

Popular brands

Panasonic KX-NS300, Features Manual

Search results

Summary of Contents for KX-NS300

Reviews:

Related manuals for KX-NS300

Brands by name

Popular brands