Panasonic KX-NS1000 Operating Manual Download Page 294

Page: 294 / 366

•

If you attempt to log in, but enter an incorrect password three times, you may not attempt to
log in again for a 5 minute period.

CAUTION

•

For security, change the password the first time that you programme the PBX.

•

It is strongly recommended that a password of 16 numbers or characters be used for
maximum protection against unauthorised access.

•

To avoid unauthorised access to the PBX, keep the password secret. If it becomes
known to others, the PBX may be misused.

•

Change the password periodically.

Edit User Screen

The

Edit User

screen is displayed when you login to Web Maintenance Console.

On this screen, you can edit various user settings.

To finish editing, click

Editing Settings in Web Maintenance Console

Changing Your User Name and Displayed Language

You can change your account’s first name, last name, and displayed language in the

User Information

tab

of the

Edit User

screen. The information entered in

First Name

and

Last Name

are displayed on your

telephone.

In the

User Information

tab, edit your

First Name

(max. 20 characters) and

Last Name

(max. 20

characters), and select the displayed language from
the

Change Language

drop-down list.

Click

3.2.1 User Programming

294

Operating Manual

Summary of Contents for KX-NS1000















































































































































































































































































































































































Search results

Summary of Contents for KX-NS1000

Reviews:

Related manuals for KX-NS1000

Brands by name

Popular brands

Panasonic KX-NS1000, Operating Manual

Search results

Summary of Contents for KX-NS1000

Reviews:

Related manuals for KX-NS1000

Brands by name

Popular brands