manualshive.com logo in svg

Panasonic KX-NS1000, Operating Manual, Page: 188 / 366

Share
Download
Panasonic KX-NS1000 Operating Manual Download Page 188

1.9.8  Turning on the Background Music (BGM)

You can listen to the background music through your telephone speaker while on-
hook. An external music source, such as a radio, can be connected.
If your extension becomes busy (off-hook, making or receiving a call etc.), the music
stops temporarily. When you go back on-hook, the music starts again.

To select and set/cancel

Off-hook.

On-hook.

Enter 

BGM number

(1 digit) or 

0

 to cancel.

PT

Enter    

751

.

Cancel

0

OR

BGM no.

5

1

7

C.Tone

•

System programming may be required for some IP-PT users to listen to background music.

1.9.9  Protecting Your Line against Notification Tones (Data Line
Security)

You can protect the line against audible notification tones, such as a call waiting tone during a conversation.
Set this feature if your extension has a data communication device, such as a PC or fax machine connected
to ensure secure data transmission.

To set/cancel

Off-hook.

On-hook.

Enter 

1

 to set

or 

0

 to cancel.

PT/SLT/PS/SIP Extn.

Set

Cancel

1

0

OR

Enter    

730

.

3

0

7

C.Tone

1.9.10  Checking the Time Service Status

You can check the current status of the Time Service on the display.

1.9.8 Turning on the Background Music (BGM)

188

Operating Manual

Summary of Contents for KX-NS1000















































































































































































































































































































































































Reviews:

No comments