Panasonic KX-NS1000, Feature Manual

Page: 87 / 482

PC Programming Manual References
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Main—
COS
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Main— COS
Feature Manual References
23.1 Capacity of System Resources
4.1.23 CPC (Calling Party Control) Signal Detection
Description
The Calling Party Control (CPC) signal is an on-hook indication (disconnect signal) sent from an analog CO
line when the other party hangs up. To maintain efficient utilization of CO lines, the PBX monitors each line’s
status and when CPC signal is detected on a line, the PBX disconnects the line and alerts the extension with
a reorder tone.
Conditions
•
CPC signal detection is programmable for incoming CO line calls, and for outgoing CO line calls.
•
If your telephone company sends signals similar to CPC, it is recommended not to enable CPC signal
detection on outgoing CO line calls.
•
If CPC signal is detected during a conference call (
®
4.1.18 Conference), the line is disconnected. The
remaining parties stay connected.
•
If CPC signal is detected during a call between a caller using the Direct Inward System Access (DISA)
feature (
®
5.1.10 DISA (Direct Inward System Access)) and an extension or an outside party, the line is
disconnected.
PC Programming Manual References
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port— CPC Signal Detection
Time—Outgoing, Incoming
4.1.24 CTI (Computer Telephony Integration)
Description
The PBX supports a CTI interface using the LAN port of the mother board. The CTI interface allows extension
users to make or receive calls with advanced features:
–
Extension users can make calls easily from a phone book in their PC.
–
When an extension user receives an incoming call, detailed caller information can be displayed on the PC
automatically.
A PC and CTI server application software, such as Panasonic Communication Assistant (CA), are required to
use CTI features. The PC running the application monitors the status of the PBX and controls the PBX via the
CTI Server.
Document Version 2016-03 Feature Manual 87
4.1.24 CTI (Computer Telephony Integration)