Panasonic KX-NCP500, Pc Programming Manual

Page: 733 / 892

Feature Manual References
16.1.7 Speed Dialing, System
CO Line Access Telephone Number
Specifies the telephone number (including the CO Line Access number) or feature number assigned to the
System Speed Dialing number.
Default
Not stored.
Value Range
Max. 32 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
8.1 [6-1] System Speed Dial
Programming Manual References
None
Feature Manual References
16.1.7 Speed Dialing, System
CLI Destination
Specifies the CLI destination (extension) to which incoming calls from the programmed telephone number are
routed. If a Caller ID Modification Table is being used, the modified number must match the telephone number
above (
CO Line Access Telephone Number ) in order for the call to be routed correctly.
Default
Not stored.
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
8.1 [6-1] System Speed Dial
Programming Manual References
12.2 [10-2] DIL Table & Port Settings—CLI for DIL— CLI Ring for DIL—Day, Lunch, Break, Night
12.3 [10-3] DID Table— CLI Ring for DID—Day, Lunch, Break, Night
Feature Manual References
3.1.3 Caller ID
3.1.14 CLI (Calling Line Identification) Distribution
Document Version 2009-12 PC Programming Manual 733
8.1 [6-1] System Speed Dial