manualshive.com logo in svg

Panasonic KX-NCP500, Pc Programming Manual, Page: 10 / 892

Share
Download
Panasonic KX-NCP500 Pc Programming Manual Download Page 10

1.1  Introduction

1.1.1  Introduction

These programming instructions are designed to serve as an overall system programming reference for the
PBX. Each feature in the PBX has default settings that can be changed to customize the PBX to your
requirements. These settings control the functions of the PBX, and changing them is referred to as "system
programming".
Only one person can perform system programming at a time. Any other users trying to enter programming
mode will be denied access.

Ways to Program

There are two programming methods:

•

PC (Personal Computer) Programming

All features and settings of the PBX can be programmed through PC programming with Maintenance
Console. Installing and starting the Maintenance Console is described in Section 1.2  PC Programming.
Individual PC programming items are described in Section  2   Introduction of Maintenance Console.

•

PT (Proprietary Telephone) Programming

A subset of the features and settings of the PBX can be programmed using a PT. PT programming is
described in the PT Programming Manual.

10

PC Programming Manual

Document Version  2009-12  

1.1.1 Introduction

Summary of Contents for KX-NCP500





























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments