Panasonic KX-NCP500, Features Manual

Page: 351 / 468

[Example]
PBX-1 PBX-2
Extn.1000
Extn.1011
(012-345-1011)
IP-GW IP-GW
Dials
"7-20-1011".
Private IP
Network
Telephone Company
(area code: 098) Telephone Company
(area code: 012)
PBX code: 20 PBX code: 30
012-345-1011
The leading numbers of extensions accessed through the VoIP network are added as entries to the Quick
Dialling table, in addition to being registered as Other PBX Extension Numbers, as shown below:
[Programming Example]
Number to dial to call an extension at another PBX using VoIP network:
7 (TIE line access number) + 20 (PBX Code) + 1011 (extension number)
Number to dial to call that extension using a public trunk:
9 (trunk access number) + 012-345-1011
[Quick Dialling Table]
Quick Dialling No. Destination No.
720 9012345
If the call cannot be completed using the VoIP network, and the dialled leading number is found in the Quick
Dialling Table, the call will be automatically rerouted to a trunk as specified by the corresponding destination
number.
When a call is made using the VoIP network, if the PBX does not receive a reply from the other PBX within
about 4 seconds of making the call, or an error is returned, the call is rerouted to a public trunk as specified.
Sending Faxes Through the Network
Through system programming, it is possible to select whether faxes are sent using analogue or T.38 protocol
signals.
Conditions
•
Some QSIG services are available. (
®
1.30.4 QSIG Standard Features)
•
TRS/Call Barring settings apply to calls rerouted to public trunks.
Installation Manual References
KX-TDE100/KX-TDE200
3.4.1 Virtual Cards
3.5.11 IP-GW4E Card (KX-TDA0484)
3.5.12 IP-GW16 Card (KX-TDA0490)
KX-TDE600
3.4.1 Virtual Cards
3.7.11 IP-GW4E Card (KX-TDA0484)
3.7.12 IP-GW16 Card (KX-TDA0490)
Feature Guide 351
1.30.2 Voice over Internet Protocol (VoIP) Network