manualshive.com logo in svg

Panasonic KX-NCP500, Features Manual

The Panasonic KX-NCP500, a versatile communication system, allows businesses to streamline their operations. Unlock its maximum potential by accessing the comprehensive programming manual. Download it for free from our website to effortlessly configure and customize your KX-NCP500, maximizing productivity and efficiency for your organization.

Share
Download
background image

1.11.4  Headset Operation

Description

This PBX allows the use of headset-compatible PTs. A PT user can talk to another party without lifting the
handset. This feature is also known as Handset/Headset Selection.
For connection and operation, refer to the Operating Instructions for the headset.

Conditions

•

Hardware Requirement:

 An optional headset.

•

If headset mode is on, pressing the SP-PHONE button activates the headset, not the built-in speaker.

•

To set headset mode on a DPT, use personal programming (Headset Operation) or press the Headset
button. To set headset mode on an APT, use the handset/headset selector provided on the set and/or on
the headset.

•

Headset Button

A flexible button on a DPT can be customised as a Headset button. It is possible to assign a Headset button
to a flexible button on an APT, but the button will not function.

•

Answer/Release Button

A flexible button can be customised as an Answer button or a Release button. Such buttons are useful for
headset operation. It is possible to answer an incoming call by pressing an Answer button. While hearing
the Call Waiting tone during a conversation, pressing an Answer button enables one to answer the second
call by placing the current call on hold. Pressing a Release button enables one to disconnect the line during
or after conversation, or to complete a Call Transfer.

•

It is possible to switch from headset mode to hands-free mode or vice versa during a conversation by
pressing the Headset button.

•

Headset users cannot use the following features:

–

Automatic Redial (

®

 1.6.1.4  Last Number Redial)

–

Receiving OHCA (

®

 1.8.4.3  Off-hook Call Announcement (OHCA))

–

Receiving Whisper OHCA (

®

 1.8.4.4  Whisper OHCA)

PC Programming Manual References

3.24  [1-1] Slot—Port Property - Extension Port—

Headset OFF/ON

3.57  [1-1] Slot—Port Property - IP-Extension Port—IP-PT Registration and De-registration—

Headset OFF/

ON
6.5  [4-1-4] Wired Extension—Flexible Button—

Type

6.17  [4-3] DSS Console—

Type

Feature Guide References

1.20.2  Flexible Buttons

User Manual References

1.3.5  Using the ANSWER/RELEASE Button
1.4.8  Using the Headset (Headset Operation)
3.1.2  Settings on the Programming Mode

Feature Guide

151

1.11.4 Headset Operation

Summary of Contents for KX-NCP500





















































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-NCP500

Brands by name

Popular brands

Load more brands