manualshive.com logo in svg

Panasonic KX-NCP500, Feature Manual

The Panasonic KX-NCP500, a versatile communication system, allows businesses to streamline their operations. Unlock its maximum potential by accessing the comprehensive programming manual. Download it for free from our website to effortlessly configure and customize your KX-NCP500, maximizing productivity and efficiency for your organization.

Share
Download
background image

4.1.3  Dial Mode Selection

Description

The dialing mode (rotary or tone) can be selected for each analog CO line through system programming
regardless of the originating extension (under contract with the telephone company).

Mode

Description

DTMF (Dual Tone
Multi-Frequency)

Numbers dialed by an extension user are transmitted to the CO line
using analog tones.

Pulse Dial (Rotary)

Numbers dialed by an extension user are transmitted to the CO line
using analog pulses.

Conditions

•

Pulse to Tone Conversion

It is possible for an extension user to temporarily switch from Pulse mode to DTMF mode in order to access
special services such as computer-accessed long distance calling or voice mail services. To switch to
DTMF mode, wait for a preprogrammed time period (Default: 5 seconds) after the CO line is connected,
or press  . This feature works only on CO lines set to Pulse mode. DTMF mode cannot be changed to
Pulse mode.

•

It is possible to select a pulse rate for the CO line port which has been set to Pulse mode. There are two
pulse rates: Low (10 pps) and High (20 pps).

•

It is possible to assign the minimum duration of the DTMF signal sent to the CO line port which has been
set to DTMF mode.

PC Programming Manual References

3.30  [1-1] Slot—Port Property - LCO Port

→

Dialing Mode

→

DTMF Width

→

Pulse Speed

3.36  [1-1] Slot—Port Property - T1 Port

→

CO Dial Mode

→

DTMF Width

→

CO Pulse Speed

PT Programming Manual References

[410] LCOT Dialing Mode
[411] LCOT Pulse Rate
[412] LCOT DTMF Minimum Duration

4.1.4  Dial Tone

Description

The following dial tones inform extension users about features activated on their extensions:
Each dial tone type has two frequencies, such as dial tone 1A and dial tone 1B.

Document Version  2013-05  

Feature Manual

77

4.1.4 Dial Tone

Summary of Contents for KX-NCP500







































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-NCP500

GE ATLAS GENTECH TSS308GE-A NZ User And Installation Manual preview
ATLAS GENTECH TSS308GE-A NZ
Brand: GE Pages: 42

Brands by name

Popular brands

Load more brands