Panasonic KX-NCP500, Feature Manual, Page: 397 / 422

21.3 Supported Management Information Base (MIB)
Table
System Group (1.3.6.1.2.1.1)
Object ID Item Description
1 sysDescr Information of Hardware type and Software version of the
Device.
2 sysObjectID Object identifier of this product.
3 sysUpTime Elapsed time since the system was restarted.
4 sysContact Device Administrator.
5 sysName Name of Device.
6 sysLocation Installation Location of Device.
7 sysService Support Layer.
Interface Group (1.3.6.1.2.1.2)
Object ID Item Description
1 ifNumber The number of Network Devices.
2 IfTable (NA) Management Table by each Network Device.
2.1 IfEntry (NA) Components of ifTable.
2.1.1 ifIndex Each interface identifier.
2.1.2 ifDescr Explanation of Interface.
2.1.3 ifType Type of Interface.
2.1.4 ifMtu Maximum Datagram Length which can be sent/received.
2.1.5 ifSpeed Maximum Transfer Speed.
2.1.6 ifPhysAddress Physical Address (MAC Address).
2.1.7 ifAdminStatus The desired state of the interface.
2.1.8 ifOperStatus The current operational state of the interface.
2.1.9 ifLastChange The value of sysUpTime at the time the interface entered
its current operational state (up or down).
2.1.10 ifInOctets The number of Octets received.
2.1.11 ifInUcastPkts The number of Unicast Packets delivered to a higher-layer
protocol.
2.1.12 ifInNUcastPkts The number of Non Unicast Packets delivered to a
higher-layer protocol.
2.1.14 ifInErrors The number of inbound Packets that contained errors.
2.1.15 ifInUnKnownProtos The number of Packet received which are discarded
because of an unknown/unsupported protocol.
Document Version 2013-05 Feature Manual 397
21.3 Supported Management Information Base (MIB) Table