manualshive.com logo in svg

Panasonic KX-NCP500, Feature Manual

Share
Download
Panasonic KX-NCP500 Feature Manual Download Page 217

Features

Descriptions

Connections

Digital XDP

Allows a DPT to be connected to another DPT
which is connected to a DPT port or a Super Hybrid
port of the PBX. The DPT that is connected directly
to the PBX is called the "master DPT", and the DPT
connected to the master DPT is called the "slave
DPT".
Similar to XDP mode, each DPT acts as a
independent extension with its own extension
number.
If a master DPT is connected to the PBX by a Super
Hybrid port (not a DPT port), a third telephone (SLT)
can also be in parallel or XDP mode with the master
DPT.
Digital XDP connection allows the number of DPTs
that the PBX supports to increase.

PBX

DPT + DPT

DPT

Extn. 101 Extn. 201

DPT

Master

Slave

PBX

DPT

Extn. 101 Extn. 201

SLT

Extn. 101 (in Parallel Mode)
     or
Extn. 105 (in XDP Mode)

DPT

Master

Slave

DPT + DPT + SLT

Wireless XDP
Parallel Mode

For information on this type of parallel connection,
refer to the Wireless XDP Parallel mode feature. 
(

®

 20.1.5  Wireless XDP Parallel Mode)

PBX

PS

PT

APT/DPT/SLT + PS

PS

SLT

Extn. 101

Extn. 101

Extn. 102

Extn. 102

Conditions

[APT + SLT]

•

If one telephone goes off-hook while the other is on a call, a three-party call is established. If one user goes
on-hook, the other user continues the call.

•

An extension user cannot originate a call from the SLT if the APT is:

–

playing background music (BGM)

–

receiving a paging announcement over the built-in speaker.

•

The SLT will always ring for incoming calls (if its ringer is turned on). It cannot be programmed to not ring.

Document Version  2013-05  

Feature Manual

217

13.1.2 Paralleled Telephone

Summary of Contents for KX-NCP500







































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands