Panasonic KX-NCP500, Feature Manual

Page: 216 / 422

Operating Manual References
1.3.48 Paging
13.1.2 Paralleled Telephone
Description
By connecting telephones in parallel, you can increase the number of telephones connected to the PBX without
adding additional extension cards.
Both wired and wireless telephones can be connected in parallel. Single line telephones (SLTs), analog
proprietary telephones (APTs), and digital proprietary telephones (DPTs) can be connected to other telephones
or connectors, allowing up to three telephones to be connected to the PBX through just one extension port.
Additionally, portable stations (PSs) can be linked to other telephones wirelessly and used as "paired"
extensions.
The different type of parallel connections are described below.
Features Descriptions Connections
Parallel Mode Allows an SLT to be connected to an APT or DPT
which is connected to a Super Hybrid port of the
PBX.
When parallel mode is enabled, the two telephones
function as follows:
•
Both share the extension number of the
telephone connected directly to the PBX (main
telephone).
•
Either telephone can make or answer a call.
APT/DPT + SLT
PBX
SLT DPT
Extn. 101 Extn. 101
APT
Extn. 102
Extn. 102
SLT
EXtra Device Port
(XDP) Mode Allows an SLT to be connected to a DPT which is
connected to a Super Hybrid port of the PBX.
Unlike parallel mode, XDP mode allows each
telephone to act as an independent extension with
its own extension number. (
®
5.1.7 Extension Port
Configuration)
DPT + SLT
PBX
SLT
DPT
Extn. 101 Extn. 105
216 Feature Manual Document Version 2013-05
13.1.2 Paralleled Telephone