Panasonic KX-MC6020E Operating Instructions Manual Download Page 18

Page: 18 / 120

2. Preparation

2 Preparation

Connections and Setup

2.1 Connections

Caution:

The mains lead must remain connected at all
times.

Never install telephone wiring during a lightning
storm.

When you operate this product, the power outlet
should be near the product and easily
accessible.

Be sure to use the telephone line cord supplied
with this unit.

Do not extend the telephone line cord.

Note:

If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.

If you use the unit with a computer and your internet
provider instructs you to install a filter (

), please

connect it as follows.

A telephone handset cannot be connected directly to
this unit. To talk to the other party, please connect an
extension telephone.

Using network router/network hub

We recommend using network routers/network hubs
(

) under secure network environments. Consult

your network administrator for firewall settings, etc.

The warranty does not cover damage due to security
problems or any disadvantages relating to it.

Mains lead

Connect to Household Mains Supply
(220–240 V, 50 Hz).

Telephone line cord

Connect to telephone network.

[

EXT

]

socket

You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.

Answering machine (not supplied)

To the internet

Network router/Network hub (not supplied)

Also connect networked computers.

Extension telephone
adaptor
(not supplied)

LAN cable (not supplied)

To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).

Automatic duplex unit (optional) connector

IMPORTANT NOTICE FOR THE USB
CONNECTION

DO NOT CONNECT THE UNIT TO A
COMPUTER WITH USB CABLE UNTIL
PROMPTED BY THE MULTI-FUNCTION
STATION (page 25).

Summary of Contents for KX-MC6020E

























































































































Search results

Summary of Contents for KX-MC6020E

Reviews:

Related manuals for KX-MC6020E

Brands by name

Popular brands

Panasonic KX-MC6020E, Operating Instructions Manual

Search results

Summary of Contents for KX-MC6020E

Reviews:

Related manuals for KX-MC6020E

Brands by name

Popular brands