Panasonic KX-MB781C Operating Instructions Manual Download

Page: 78 / 96

12. Paper Jams

12.1.2 When the recording paper is not fed
into the unit properly

The display will show the following.

CHECK PAPER #1

PRESS START

Pull the paper input tray until it clicks into place, then
pull it completely out, lifting the front part of the tray.
Remove the recording paper and straighten.

Re-load the recording paper.

Insert the paper input tray to the unit, lifting the front
part of the tray. Then push it completely into the unit.

Note:

If the error message is still displayed, check the
recording paper specifications and re-install
recording paper. See page 13 for details.

12.1.3 When the recording paper in the
manual input tray is not fed into the unit
properly

The display will show the following.

CHECK PICK UP

INPUT TRAY #2

Remove the recording paper.

Re-insert the recording paper.

Note:

If the error message is still displayed, check the
recording paper specifications and re-install
recording paper. See page 26 for details.

MB781C-PFQX2742ZA-OI-en.book Page 78 Tuesday, September 4, 2007 1:24 PM

Summary of Contents for KX-MB781C

































































































Search results

Summary of Contents for KX-MB781C

Reviews:

Related manuals for KX-MB781C

Brands by name

Popular brands

Panasonic KX-MB781C, Operating Instructions Manual

Search results

Summary of Contents for KX-MB781C

Reviews:

Related manuals for KX-MB781C

Brands by name

Popular brands