9. Programmable Features
55
9.4 Copy features
9.5 PC print features
Feature/Code
Selection
Changing the default copy
resolution
{#}{
4
}{
6
}{
1
}
To change the default resolution setting for copying.
{
1
}
“
TEXT/PHOTO
”
: For documents containing both text and photographs.
{
2
}
“
TEXT
”
(default): For documents containing only text.
{
3
}
“
PHOTO
”
: For documents containing photographs, shaded drawings, etc.
Holding the previous page
layout setting
{#}{
4
}{
6
}{
7
}
{
0
}
“
DISABLED
”
(default): Deactivates this feature.
{
1
}
“
ENABLED
”
: The unit will hold the previous setting.
Holding the previous zoom
(enlargement / reduction)
setting
{#}{
4
}{
6
}{
8
}
{
0
}
“
DISABLED
”
(default): Deactivates this feature.
{
1
}
“
ENABLED
”
: The unit will hold the previous setting.
Holding the previous collate
setting
{#}{
4
}{
6
}{
9
}
{
0
}
“
DISABLED
”
(default): Deactivates this feature.
{
1
}
“
ENABLED
”
: The unit will hold the previous setting.
Feature/Code
Selection
Changing the data timeout
setting
{#}{
7
}{
7
}{
4
}
The unit will automatically print the remaining data in memory when the
computer does not send data to the unit during the set time.
1.
{
MENU
}
i
{#}{
7
}{
7
}{
4
}
i
{
SET
}
2.
Enter the desired data timeout setting from
“
005
”
seconds to
“
600
”
seconds, using the dial keypad.
L
The default setting is
“
030
”
seconds.
3.
{
SET
}
i
{
MENU
}
MB271-781-PFQX2722ZA-OI-en.book Page 55 Tuesday, May 22, 2007 5:20 PM
