Panasonic KX-MB2061, Operating Instructions Manual

Page: 94 / 160

11.1.7 LAN features
Feature/Code Selection
LAN setting with a DHCP
server
MBNM 5 NM 0 NM 0 N
M 0 N “
DISABLED
” : Deactivates this feature.
M 1 N “
ENABLED
” (default): The following will be allocated automatically using a
DHCP (Dynamic Host Configuration Protocol) server.
– IP address
– Subnet mask
– Default gateway
Setting the IP address for the
LAN connection
MBNM 5 NM 0 NM 1 N
This feature is available when feature #500 is deactivated.
1. M Menu N A MBNM 5 NM 0 NM 1 N A M Set N
2. Enter the IP address of the unit on the LAN using the dial keypad. A
M Set N A M Menu N
Setting the Subnet mask for
the LAN connection
MBNM 5 NM 0 NM 2 N
This feature is available when feature #500 is deactivated.
1. M Menu N A MBNM 5 NM 0 NM 2 N A M Set N
2. Enter the subnet mask of the network on the LAN using the dial keypad.
A M Set N A M Menu N
Setting the default gateway
for the LAN connection
MBNM 5 NM 0 NM 3 N
This feature is available when feature #500 is deactivated.
1. M Menu N A MBNM 5 NM 0 NM 3 N A M Set N
2. Enter the default gateway of the network on the LAN using the dial keypad.
A M Set N A M Menu N
Setting the primary DNS
server for the LAN
connection
MBNM 5 NM 0 NM 4 N
This feature is available when feature #500 is deactivated.
1. M Menu N A MBNM 5 NM 0 NM 4 N A M Set N
2. Enter the primary DNS server of the network on the LAN using the dial
keypad.
A M Set N A M Menu N
Setting the secondary DNS
server for the LAN
connection
MBNM 5 NM 0 NM 5 N
This feature is available when feature #500 is deactivated.
1. M Menu N A MBNM 5 NM 0 NM 5 N A M Set N
2. Enter the secondary DNS server of the network on the LAN using the dial
keypad.
A M Set N A M Menu N
Setting the machine name
MBNM 5 NM 0 NM 7 N
1. M Menu N A MBNM 5 NM 0 NM 7 N A M Set N
2. Enter the name of the unit to recognize on the LAN, up to 15 characters,
using the English alphabet and numbers (see page 106 for character entry).
R The following symbols can also be entered using M 0 N or M 1 N .
! @ # $ % ^ & ’ ) ( . – _ { }
3. M Set N A M Menu N
Note:
R In order to recognize the unit on the LAN, the default name of the unit is
assigned automatically. If you change the name, assign a unique name to
avoid overlapping.
Displaying the MAC address
of the unit
MBNM 5 NM 0 NM 8 N
1. M Menu N A MBNM 5 NM 0 NM 8 N A M Set N
2. The MAC address of the unit will be displayed. A M Menu N
94
11. Programmable Features