Panasonic KX-MB2061, Operating Instructions Manual

Page: 79 / 160

Feature/Code Selection
Selecting the scale
MBNM 1 NM 4 NM 7 N
M 1 N “
MILLIMETERS
”
M 2 N “
INCHES
” (default)
Note:
R The selected scale will be used when measurements are shown on the base
unit’s display.
Changing the password for
feature programming via
remote operation
MBNM 1 NM 5 NM 5 N
1. M Menu N A MBNM 1 NM 5 NM 5 N A M Set N
2. Enter the current password. A M Set N
R The default password is “
1234
” .
3. Enter a new 4-digit password using 0-9. A M Set N
4. Enter the new password again. A M Set N A M Menu N
Note:
R It is recommended that you change this password from the default
password.
R This password is also used for feature programming via a web browser (LAN
connection only).
Setting the toner
maintenance time
MBNM 1 NM 5 NM 8 N
The base unit will automatically activate for maintenance, once every 24 hours.
Because this is to prevent the toner from solidifying, the noise that the base unit
makes during maintenance cannot be stopped. However, if the base unit’s noise
bothers you, you can change the start time.
1. M Menu N A MBNM 1 NM 5 NM 8 N A M Set N
2. Enter the maintenance start time.
R The default time is “
12:00PM
” .
R Press MGN repeatedly to select “
AM
” or “
PM
” .
R If you select Spanish for the language (feature #110 on page 78), the
default time is
“
12:00
” .
3. M Set N A M Menu N
Resetting all features (and
deleting all data in memory)
MBNM 1 NM 5 NM 9 N
Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
Phonebook (or caller information) and fax transmission data (journal report and
faxes received in memory) will be deleted.
M 0 N “
NO
” (default)
M 1 N “
YES
”
R Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
R Date and time setting on the cordless handset programming will also be
reset (page 99) (KX-MB2060 optional).
To reset all features:
1.
M Menu N A MBNM 1 NM 5 NM 9 N
2. Press M 1 N to select “
YES
” . A M Set N
3. Press M 1 N to select “
YES
” . A M Set N
Setting the ringtone for
outside calls
*2
MBNM 1 NM 6 NM 1 N
M 1 N “
RINGTONE 1
” (default)
M 2 N “
RINGTONE 2
”
M 3 N “
RINGTONE 3
”
M 4 N “
RINGTONE 4
”
M 5 N “
RINGTONE 5
”
M 6 N “
RINGTONE 6
”
79
11. Programmable Features