Panasonic KX-MB1500E Operating Instructions Manual Download Page 19

Page: 19 / 92

Maximum document size

356 mm

216 mm

Effective scanning area

216 mm

208 mm

4 mm

Shaded area will be scanned.

When using the unit as a scanner (page 28,
29), the effective scanning length depends on
the selected paper size.

Document weight

Single sheet:
60 g/m² to 75 g/m²

Multiple sheets:
60 g/m² to 75 g/m²

2.3 Adjusting the volume
(KX-MB1520/KX-MB1530 only)

Important:

Before adjusting the volume, set the operation
mode to fax mode. If the

Fax

light is OFF, turn

it ON by pressing

Fax

repeatedly.

Set

N MCNMDN

Fax

Ringer volume
While the unit is idle,

press

MCN

MDN

To turn the ringer OFF

Press

MCN

repeatedly to display

“

RINGER OFF= OK?

”

Set

The unit will not ring.

To turn the ringer back ON, press

MDN

Speaker volume
While using the speakerphone,

press

MCN

MDN

2. Preparation

Summary of Contents for KX-MB1500E





























































































Search results

Summary of Contents for KX-MB1500E

Reviews:

Related manuals for KX-MB1500E

Brands by name

Popular brands

Panasonic KX-MB1500E, Operating Instructions Manual

Search results

Summary of Contents for KX-MB1500E

Reviews:

Related manuals for KX-MB1500E

Brands by name

Popular brands