Panasonic KX-HTS824, Feature Manual

Page: 54 / 80

PIL Reference
2.2.2 PBX Configuration—[1-2] System—MOH
3.8 Transferring Features
3.8.1 Call Transfer-Screened
Description
It is possible to transfer a trunk or an extension which is in a conversation to another extension after
confirming by speaking with the other party at the transfer destination.
Call Transfer—Screened is also known as Call Transfer with Announcement.
Operation
Perform Call Transfer-Screened using the following procedure:
1.
Put the current call on Consultation Hold by executing the following operations:
SLT: Hooking
SIP: Press the [TRANSFER] button
2.
After a dial tone is heard, make a call to the transfer destination. It is possible to call from an extension
using the DSS button while a dial tone is being heard for entering the transfer destination.
3.
After the transfer destination answers, go on-hook.
Perform Cancel Call Transfer-Screened using the following procedure:
SLT: Operation is as follows:
•
Hooking. After that, the original two-party conversation will be restart.
•
Go on-hook. After that, the operated extension will ring.
SIP extension: Press the [CANCEL] button twice.
Conditions
Conditions Note
The following cannot be set as transfer destinations:
•
DISA (Refer to 3.1.4 DISA (Direct Inward System Access))
•
Meet Me (Refer to 3.9.2 Meet-me conference)
•
Doorphone (Refer to 3.11.1 Doorphone Call)
•
Built-in VM (Refer to 5 Voice Mail Features)
•
Paging (Refer to 3.10 Paging Features)
Analog extension, SIP phone can operate the Call Transfer feature.
General SIP extension depends on the terminal specifications.
The FWD setting for the transfer destination extension is enabled. If
the FWD destination of the Transfer destination is DISA or Meet-me,
call transferring will be restricted. Reference:
3.1.4 DISA (Direct Inward System
Access)
3.9.2 Meet-me conference
A party who is put on Consultation Hold will hear Music on hold
(MOH). Refer to 3.7.3 Music on Hold.
3.8 Transferring Features
54 Feature Manual