Conditions
Note
The following number cannot be set as DISA-AA Destination:
•
Trunk Line / Trunk Group, Idle Line Access (Refer to 2.1.1 Feature
Number Lists for User)
•
Doorphone (Refer to 3.11.1 Doorphone Call)
•
Built-in VM (Refer to 5 Voice Mail Features)
It is possible to register destination numbers for 0 to 9 for each
OGM.
It is possible to make a call to an extension (including a floating
extension number) by inputting a number set by
1 Digit AA
Destination (Extension Number).
In order to identify that it is
1 Digit
AA Destination (Extension
Number)
, do not dial any
additional numbers until the 2nd
digit input timer is timed-out which
is set in
2nd Dial Timer for AA.
If
the 2nd digit is input, the AA
operation will be invalid.
PIL Reference
2.4.5 PBX Configuration—[3-5] Trunk—DISA
3.1.6 FAX Detection
Description
The PBX can distinguish between fax calls and other types of calls arriving on DISA lines, and automatically
transfer fax calls to preprogrammed destinations. When a call arrives on a DISA line, an OGM is played.
At the same time, the PBX begins fax signal detection. If a fax signal is detected, the PBX recognizes that
the call is a fax call, and transfers the call to the fax destination assigned to that OGM through system
programming.
This allows a single trunk to be used seamlessly for both voice and fax calls, with only voice calls arriving at
user extensions.
Conditions
Conditions
Note
The PBX can detect only a fax tone from an analog trunk.
The following numbers cannot be set as FAX Destination:
•
Trunk Line / Trunk Group, Idle Line Access (Refer to 2.1.1 Feature
Number Lists for User)
•
DISA (Refer to 3.1.4 DISA (Direct Inward System Access))
•
Meet Me (Refer to 3.9.2 Meet-me conference)
•
Doorphone (Refer to 3.11.1 Doorphone Call)
•
Built-in VM (Refer to 5 Voice Mail Features)
This feature is only effective for calls arriving on DISA lines.
It is possible to register FAX destinations for each OGM. The
destination settings are made the same way as for DISA-AA.
3.1.6 FAX Detection
28
Feature Manual
Summary of Contents for KX-HTS824
