between the product and hub in
an indoor environment.
– away from electronic appliances
such as TVs, radios, personal
computers, wireless devices, or
other phones.
– facing away from radio frequency
transmitters, such as external
antennas of mobile phone cell
stations. (Avoid putting the hub
on a bay window or near a
window.)
R
If the reception for a hub location is
not satisfactory, move the hub to
another location for better reception.
Environment
R
Keep the product away from
electrical noise generating devices,
such as fluorescent lamps and
motors.
R
The product should be kept free
from excessive smoke, dust, high
temperature, and vibration.
R
The product should not be exposed
to direct sunlight.
R
Do not place heavy objects on top of
the product.
R
The product should be kept away
from heat sources such as heaters,
kitchen stoves, etc. It should not be
placed in rooms where the
temperature is less than 0 °C (32 °F)
or greater than 40 °C (104 °F).
Damp basements should also be
avoided.
R
Operating the product near electrical
appliances may cause interference.
Move away from the electrical
appliances.
R
The sensor may make false
detections in noisy locations, such
as where there is noise from metallic
blinds opening and closing, or
metallic bells of alarm clocks. Avoid
installing the sensor in these
locations.
R
The sounds of doors opening and
closing may cause false detections.
Do not install the sensor near doors.
R
Do not place screens or shielding
(such as sound blocking curtains)
between the glass and sensor. This
may prevent the sensor from being
able to detect the sound of glass
breaking.
R
The product may not be able to
detect the sound of glass breaking
depending on the noise conditions of
the surrounding area.
R
To avoid false detections, do not
install the product in areas where
loud noises occur or near devices
that produce loud noise.
R
Refer to “Sensor detection range” on
page 13 and install the product
within the wireless communication
range of the hub.
Other information
CAUTION:
Risk of explosion if battery
is replaced by an incorrect type.
Dispose of used batteries according to
the instructions.
Routine care
R
Wipe the outer surface of the
product with a soft moist cloth.
R
Do not use benzine, thinner, or any
abrasive powder.
6
For assistance, please visit http://shop.panasonic.com/support
Warnings and Product Limitations/Important Information
HNS104_(en_en)_1102_ver.310.pdf 6
2015/11/02 14:58:48
