Connections
Hub
4
3
1
2
1
Indoor Camera
1
Outdoor Camera
1
Indoor Siren
1
Insert the backup battery’s DC plug firmly into the device’s DC jack, DC cable
plug, or DC extension cord.
Insert the DC plug completely. (This example illustration applies to the
KX-HNB600 and KX-HNC200.)
Connect the AC adaptor plug to the backup battery.
Secure the AC adaptor cord by wrapping it around the hook.
Connect the AC adaptor to the power outlet.
Note:
R
The AC adaptor described in these instructions is the AC adaptor that was
supplied with your compatible device.
R
It takes about 10 hours to fully charge the battery.
R
The backup battery’s LED indicator lights in amber while the battery is charging.
When charging is complete, the LED indicator turns off (page 10).
R
Compatible devices shown here are current as of the time of printing. Additional
compatible devices may become available at a later date.
12
Setup
