Panasonic KX-HNH100C Operating Instructions Manual Download

Page: 9 / 56

Setting up

Connections

Connect the AC adaptor to the power
outlet.

Wall mounting

Note:

Make sure that the wall and the fixing
method are strong enough to support the
weight of the unit.

Drive the screws (

) (not supplied) into the

wall.

27.2 mm (1

inches)

Battery installation

USE ONLY rechargeable Ni-MH batteries
AAA (R03) size (

Do NOT use Alkaline/Manganese/Ni-Cd
batteries.

Confirm correct polarities (

Follow the directions on the display to set
up the unit.

Battery charging

Charge for about 7 hours.

Confirm

“

Charging

”

is displayed (

When the batteries are fully charged,

“

Fully charged

”

is displayed.

For assistance, visit www.panasonic.ca/english/support

Getting Started

HNH100C_(en_en)_0130_ver.202.pdf 9

2017/01/30 16:12:23

Summary of Contents for KX-HNH100C

























































Search results

Summary of Contents for KX-HNH100C

Reviews:

Related manuals for KX-HNH100C

Brands by name

Popular brands

Panasonic KX-HNH100C, Operating Instructions Manual

Search results

Summary of Contents for KX-HNH100C

Reviews:

Related manuals for KX-HNH100C

Brands by name

Popular brands