Panasonic KX-HNC500, User Manual

Page: 171 / 200

HD camera device profiles
The camera’s device profile allows you to assign a name and location to the camera. These settings are
especially convenient when you have multiple cameras. You can also change the camera’s date and
time setting.
1
View live images from the desired camera.
2
Open the options menu (see “Displaying the options menu”, Page 151).
3
Tap [Settings] .
4
Tap [Device Profiles] .
5
Change the settings as desired, and then tap [OK] .
– [Location] : This setting determines the location name assigned to the camera.
– [Name] : This setting determines the name assigned to the camera.
– [Camera LED] : This setting determines whether the camera’s LED indicator lights or is disabled.
– [Time Adjustment] : This setting allows you to synchronize the camera’s date and time setting
with the date and time setting of your mobile device.
To synchronize the date and time setting of the mobile device displayed on this screen, tap
[Update Time] .
To change the mobile device used for time synchronization, tap the name of the mobile device
displayed on this screen, select the desired mobile device, and then tap
[OK] .
Network features
Confirming network information
1
View live images from the desired camera.
2
Open the options menu (see “Displaying the options menu”, Page 151).
3
Tap [Settings]
®
[Wireless Settings] .
4
Tap [Current Status] .
Changing IP settings
Typically these settings should not be changed.
1
View live images from the desired camera.
2
Open the options menu (see “Displaying the options menu”, Page 151).
3
Tap [Settings]
®
[Wireless Settings] .
4
Tap [IP Settings] .
5
Select the desired IP address mode.
R In most cases [Auto (DHCP)] is preferred. In this case, no other settings are available on this
screen.
R If you select [Manual (Static)] , other settings on this screen become available. If these settings
are not configured to match your wireless router’s requirements, the camera will not be able to
connect to your wireless router and all app features will become unavailable.
6
Configure the settings as needed and then tap [OK] .
Note:
R If you make a mistake while configuring the camera to use a static IP address and you can no longer
connect to the camera, reset the camera ( “Resetting the HD camera’s settings”, Page 173), and then
set up the camera again by following the initial setup procedure (see “Setting up the HD camera”,
Page 149).
171
Using an HD camera