Panasonic KX-HDV430 Administrator'S Manual Download Page 58

Page: 58 / 336

4.2.1.1 Version Information

Model

Description

Indicates the model number of the unit (reference only).

Value Range

Model number

IPL Version

Description

Indicates the version of the IPL (Initial Program Load) that runs when
starting the unit and the SIP software version of the unit (reference
only).

Value Range

IPL version ("nn.nnn" [n=0–9])
SIP software version ("[SIP: n.nn]" [n=0–9])

Firmware Version

Description

Indicates the version of the firmware that is currently installed on the
unit (reference only).

Value Range

Firmware version ("nn.nnn" [n=0–9])

4.2.2 Network Status

This screen allows you to view the current network information of the unit, such as the MAC address, IP
address, Ethernet port status, etc.
Clicking

[Refresh]

updates the information displayed on the screen.

4.2.2 Network Status

Administrator Guide

Document Version 2016-05

Summary of Contents for KX-HDV430

















































































































































































































































































































































Search results

Summary of Contents for KX-HDV430

Reviews:

Brands by name

Popular brands

Panasonic KX-HDV430, Administrator'S Manual

Search results

Summary of Contents for KX-HDV430

Reviews:

Brands by name

Popular brands