Panasonic KX-HDV430 Administrator'S Manual Download

Page: 145 / 336

4.7.2 Firmware Maintenance

This screen allows you to perform firmware updates automatically.

4.7.2.1 Firmware Maintenance

Enable Firmware Update

Description

Selects whether to perform firmware updates when the unit detects a
newer version of firmware.

Note

•

Firmware updates using TR-069 can be performed regardless
of this setting.

Value Range

•

Yes

•

Default Value

Yes

Configuration File Reference

FIRM_UPGRADE_ENABLE

Firmware File URL

Description

Specifies the URI where the firmware file is stored.

Note

•

This setting is available only when

[Enable Firmware Update]

is set to

[Yes]

Value Range

Max. 384 characters

Note

•

If "{fwver}" is included in this parameter, it will be replaced with
the value specified in

[Firmware Version]

. For details about

the formats, see

2.1.3 Server Address Formats

Default Value

Not stored.

Configuration File Reference

FIRM_FILE_PATH

4.7.2 Firmware Maintenance

Document Version 2016-05

Administrator Guide

145

Summary of Contents for KX-HDV430

















































































































































































































































































































































Search results

Summary of Contents for KX-HDV430

Reviews:

Related manuals for KX-HDV430

Brands by name

Popular brands

Panasonic KX-HDV430, Administrator'S Manual

Search results

Summary of Contents for KX-HDV430

Reviews:

Related manuals for KX-HDV430

Brands by name

Popular brands