Tone Timings
Description
Specifies the pattern, in milliseconds, of stutter dial tones to notify
that a voice mail is waiting, using up to 22 whole numbers (off 1, on 1,
off 2, on 2…) separated by commas.
Note
•
It is recommended that you set a value of 560 milliseconds or
more for the first value (off 1).
Value Range
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
Default Value
560,100,100,100,100,100,100,100,100,100,100,100,100,100,100,10
0,100,100,100,100,100,0
Configuration File Reference
4.6.5.5 Reorder Tone
Tone Frequencies
Description
Specifies the dual-tone frequencies, in hertz, of reorder tones using 2
whole numbers separated by a comma.
Value Range
0, 200–2000 (0: No tone)
Note
•
If the value for this setting is "480,620", the unit will use a
mixed signal of a 480 Hz tone and a 620 Hz tone.
Default Value
480,620
Configuration File Reference
Tone Timings
Description
Specifies the pattern, in milliseconds, of reorder tones using up to 10
whole numbers (off 1, on 1, off 2, on 2…) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
Value Range
0–16000 (0: Infinite time)
Default Value
60,250,190
Note
•
Avoid setting 1–50 for any of the values.
Configuration File Reference
4.6.5 Tone Settings
134
Administrator Guide
Document Version 2016-05
Summary of Contents for KX-HDV430
