manualshive.com logo in svg

Panasonic KX-HDV230, Administrator'S Manual, Page: 113 / 342

Share
Download
Panasonic KX-HDV230 Administrator'S Manual Download Page 113

4.4.4  Time Adjust Settings

This screen allows you to enable automatic clock adjustment using an NTP server and configure the settings
for DST (Daylight Saving Time), also known as Summer Time.

4.4.4.1  Synchronization (Synchronisation)

Server Address

Description

Specifies the IP address or FQDN of NTP server.

Value Range

Max. 256 characters

Default Value

Not stored.

Configuration File Reference

NTP_ADDR (Page 231)

Synchronization Interval (Synchronisation Interval)

Description

Specifies the interval, in seconds, between synchronizations with the
NTP server.

Value Range

10–86400

Default Value

43200

Configuration File Reference

TIME_QUERY_INTVL (Page 231)

4.4.4.2  Time Zone

Time Zone

Description

Selects your time zone.

Value Range

GMT -12:00–GMT +13:00

Document Version  2015-07  

Administrator Guide

113

4.4.4 Time Adjust Settings

Summary of Contents for KX-HDV230























































































































































































































































































































































Reviews:

No comments