manualshive.com logo in svg

Panasonic KX-HDV100, Administrator'S Manual

Share
Download
Panasonic KX-HDV100 Administrator'S Manual Download Page 280

Step 4

Once the newer firmware is downloaded, it is
applied to the unit and the unit automatically
restarts.

A

Version 01.050 Updated

7.4  Upgrade Firmware

When an updated version of the firmware is provided on a Web site or other means, you can perform the
firmware update manually using Web user interface programming.
For details about the manual firmware update, see 

4.7.3  Upgrade Firmware

.

To manually update the firmware
1.

In the Web user interface, click the 

[Maintenance]

 tab, and then click 

[Upgrade Firmware]

.

2.

Enter a URL in 

[Firmware File URL]

.

Example: http://firm.example.com/firm/01.050.fw

3.

Click 

[Upgrade Firmware]

.

Note

•

You can use an HTTP server as the firmware server by simply setting its URL.

•

A firmware update takes about 4 minutes.

•

The unit will restart after the firmware update is complete.

•

The unit cannot be used while the firmware is being updated.

280

Administrator Guide

Document Version  2015-02  

7.4 Upgrade Firmware

Summary of Contents for KX-HDV100































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands