Panasonic KX-FT932RU-B, Service Manual

Page: 90 / 177

90
KX-FT932RU-B/KX-FT932CA-B/KX-FT932UA-B/KX-FT934RU-B/KX-FT934CA-B/KX-FT934UA-B
OK means "can set".
NG means "can not set".
Note:
Refer to Service Function Table (P.57) for descriptions of the individual codes.
Example:
If you want to set value in the "004 Transmission report mode", press the dial key number 1, 2 or 3 corresponding to the Set
Value you want to select. (1:ON/2:OFF/3:ERROR)
710 Memory clear except History data --------- --------- NG
717 Transmit speed select 1:9600/ 2:7200/ 3:4800/ 4:2400 9600bps OK
718 Receive speed select 1:9600/ 2:7200/ 3:4800/ 4:2400 9600bps OK
722 Redial tone detect 1:ON / 2:OFF ON OK
745 Power on film feed 1:ON / 2:OFF ON OK
763 CNG detect time for friendly reception 1:10s / 2:20s / 3:30s 30s OK
774 T4 timer 00~99 x 100ms 00ms OK
815 Sensor test --------- --------- NG
852 Print test pattern --------- --------- NG
853 Top margin 1~9 mm 3 OK
874 DTMF ON time 60~20 10ms OK
875 DTMF OFF time 60~20 10ms OK
880 History list 1:SET --------- NG
881 Journal 2 1:SET --------- NG
882 Journal 3 1:SET --------- NG
961 The time transmitting the false ring back tone 01~10 x sec 05sec OK
962 The operator calling time 05~30 x sec 13sec OK
991 Setup list 1:Start --------- OK
994 Journal list 1:Start --------- OK
995 Journal 2 list 1:Start --------- OK
996 Journal 3 list 1:Start --------- OK
998 History list 1:Start --------- OK
999 Service list 1:Start --------- OK
Code Function Set Value Default Remote Set-
ting