Panasonic KX-FT932FX Page 39 Operating Instructions Manual Download

Page: 39 / 52

9. Help

“

FAX IN MEMORY

”

The unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
47.

“

FAX MEMORY FULL

”

The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper (page 5) or clear the jammed paper
(page 44).

When performing broadcast transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.

“

MEMORY FULL

”

There is no space to store new items in the phonebook. Erase unnecessary
items (page 14).

“

MESSAGE FULL

”

There is no memory available to record voice messages. Erase
unnecessary messages (page 29).

“

MODEM ERROR

”

There is something wrong with the unit’s modem. Contact our service
personnel.

“

NO FAX REPLY

”

The other party’s fax machine is busy or has run out of recording paper. Try
again.

“

PAPER JAMMED

”

A recording paper jam occurred. Clear the jammed paper (page 44).

“

PLEASE WAIT

”

The unit is checking and initializing the paper cutter. Wait for a moment
while the check is completed.

“

POLLING ERROR

”

The other party’s fax machine does not support polling. Check with the
other party.

“

REDIAL TIME OUT

”

The other party’s fax machine is busy or has run out of recording paper. Try
again.

“

REMOVE DOCUMENT

”

The document is jammed. Remove the jammed document (page 44).

Press

{

STOP

}

to eject the jammed document.

“

SYSTEM IS BUSY

”

The system is busy. Replace the handset or stop using monitor, then try
again.

“

TRANSMIT ERROR

”

A transmission error occurred. Try again.

“

UNIT OVERHEATED

”

The unit is too hot. Stop using the unit for a while and let the unit cool down.

Display

Cause & Solution

FT932-938FX_PFQX2588ZA-en.book Page 39 Thursday, June 15, 2006 8:30 AM

Summary of Contents for KX-FT932FX





















































Search results

Summary of Contents for KX-FT932FX

Reviews:

Related manuals for KX-FT932FX

Brands by name

Popular brands

Panasonic KX-FT932FX, Operating Instructions Manual

Search results

Summary of Contents for KX-FT932FX

Reviews:

Related manuals for KX-FT932FX

Brands by name

Popular brands