Panasonic KX-FPG378 Page 15 Operating Instructions Manual Download

Page: 15 / 110

1. Introduction and Installation

For Fax Advantage assistance, call 1-800-435-7329.

Installation (Base Unit)

1.6 Ink film

The included film roll is a starter ink film.

1.6.1 Installing the ink film

Important:

Remove all the blue shipping tape from
the unit before installation.

Open the front cover by pulling up the center
part.

Release the back cover by pushing the green
button (

You can also release the back cover by
pushing in the green lever (

Open the back cover.

Insert the front ink film roll by inserting its
blue gear into the left slot of the unit (

Insert the rear ink film roll by inserting its
white gear into the left slot of the unit (

The ink film is safe to touch and will not
rub off on your hands like carbon paper.

Make sure the blue gear (

) and white

gear (

) are installed as shown.

FPG379-PFQX2138ZA-en.book Page 13 Wednesday, January 12, 2005 4:49 PM

Summary of Contents for KX-FPG378















































































































Search results

Summary of Contents for KX-FPG378

Reviews:

Related manuals for KX-FPG378

Brands by name

Popular brands

Panasonic KX-FPG378, Operating Instructions Manual

Search results

Summary of Contents for KX-FPG378

Reviews:

Related manuals for KX-FPG378

Brands by name

Popular brands