Panasonic KX-FPC185C Page 117 Operating Instructions Manual Download | Manualshive

Page: 117 / 124

background image

Limited Warranty

117

Limited Warranty

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga, Ontario L4W 2T3

PANASONIC PRODUCT – LIMITED WARRANTY

Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees
to remedy any such defect for a period as stated below from the date of original purchase.

Facsimile Product – One (1) year, parts and labour

LIMITATIONS AND EXCLUSIONS

This warranty does not apply to products purchased outside Canada or to any product which has been
improperly installed, subjected to usage for which the product was not designed, misused or abused, damaged
during shipping, or which has been altered or repaired in any way that affects the reliability or detracts from the
performance, nor does it cover any product which is used commercially. Dry cell batteries, toner cartridge /
drum unit and ink / print cartridges are also excluded from coverage under this warranty. Rechargeable
batteries are warranted for ninety (90) days from date of original purchase. This warranty is extended to the
original end user purchaser only. A purchase receipt or other proof of date of original purchase is required
before warranty service is performed.

THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, EXCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.

In certain instances, some jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages, or the exclusion of implied warranties, so the above limitations and exclusions may not be
applicable.

WARRANTY SERVICE

For product operation and information assistance

, please contact your Dealer or our Customer Care

Centre at: Telephone #: (905) 624-5505 Fax #: (905) 238-2360 Web: www.panasonic.ca

For product repairs

, please contact one of the following:

• Your Dealer who will inform you of an authorized Servicentre nearest you.
• Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca
• A Panasonic Factory Servicentre listed below:

IF YOU SHIP THE PRODUCT TO A SERVICENTRE

Carefully pack and send prepaid, adequately insured and preferably in the original carton.

Include details of the defect claimed, and proof of date of original purchase.

Richmond,
British Columbia

Calgary, Alberta

Mississauga, Ontario

Lachine, Québec

Panasonic Canada Inc.
12111 Riverside Way
Richmond, BC, V6W 1K8
Tel: (604) 278-4211
Fax: (604) 278-5627

Panasonic Canada Inc.
6835-8

th

St. N. E.

Calgary, AB, T2E 7H7
Tel: (403) 295-3955
Fax: (403) 274-5493

Panasonic Canada Inc.
5770 Ambler Drive
Mississauga, ON,
L4W 2T3
Tel: (905) 624-8447
Fax: (905) 238-2418

Panasonic Canada Inc.
3075, rue Louis A. Amos
Lachine, QC, H8T 1C4
Tel: (514) 633-8684
Fax: (514) 633-8020

«
...
115
116
117
118
119
...
»

Summary of Contents for KX-FPC185C





























































































































Reviews:

No comments

Related manuals for KX-FPC185C

Brand: Samsung Pages: 88

Brand: Samsung Pages: 11

Brand: Samsung Pages: 98

Brand: Hagan Pages: 6

Brand: Necchi Pages: 122

Brand: Garudan Pages: 30

Brand: Sinbo Pages: 48

Ninja warrior 1200PSI NWCU1312N

Brand: Prochem Pages: 44

Brand: YARDMAX Pages: 28

Brand: Janome Pages: 40

Brand: ZOJE Pages: 100

Brand: SunStar Pages: 22

Brand: Silver Pages: 69

PicoBaristo HD8927

Brand: Saeco Pages: 166

Brand: VLX Pages: 324

Brand: Euro-Pro Pages: 40

Brand: Scotsman Pages: 13

Brand: Indesit Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands