Panasonic KX-FP702CX, Service Manual

Page: 153 / 211

153
KX-FP701CX/KX-FP702CX
15.1.2.1. Maintenance List
15.1.2.2. Maintenance Cycle
Note:
*
1
These values are standard and may vary depending on usage conditions.
*
2
Refer to 20.1.Cabinet, Mechanical and Electrical Parts Location (P.195).
No. OPERATION CHECK REMARKS
1 Document Path Remove any foreign matter such as paper. —
2 Rollers If the roller is dirty, clean it with a damp cloth then dry thor-
oughly. Refer to 15.4.1.Document feeder/recording
paper feeder/scanner glass cleaning (P.161).
3 Platen Roller If the platen is dirty, clean it with a damp cloth then dry
thoroughly. Remove the paper and film cartridge before
cleaning. —
4 Thermal Head If the thermal head is dirty, clean the printing surface with a
cloth moistened with denatured alcohol (alcohol without
water), then dry thoroughly. Refer to 15.4.2.Thermal Head Cleaning (P.162).
5 Sensors Document top sensor (SW337), Document set sensor
(SW338), Cover open sensor (SW502), Paper top sensor
(SW502), Film detection sensor (SW501), Film end sensor
(SW1003) . Confirm the operation of the sensors. See 15.1.2.Maintenance Check Items/Compo-
nent Locations (P.152) and 14.2.11.HOW TO
REMOVE THE DIGITAL, ANALOG, SENSOR
BOARDS
(P.147).
6 Glass If the glass is dirty, clean them with a dry soft cloth. Refer to 15.4.1.Document feeder/recording
paper feeder/scanner glass cleaning (P.161).
7 Abnormal, wear and tear
or loose parts Replace the part. Check if the screws are tight on all parts. —
No. Item Cleaning Cycle Replacement
Cycle Procedure
1
Separation Roller (Ref. No. 145)*
2
3 months
7 years*
1
(31,500 documents) Refer to
14.2.13.HOW TO REMOVE THE
MOTOR BLOCK AND SEPARATION ROLLER
(P.149).
2 Separation Rubber (Ref. No. 13) 3 months 7 years (31,500 documents) Refer to 15.4.1.Document feeder/recording
paper feeder/scanner glass cleaning (P.161).
3 Feed Rollers (Ref. No. 11, 56, 94) 3 months 7 years (31,500 documents) Refer to 14Disassembly and Assembly
Instructions (P.135).
4 Thermal Head (Ref. No. 40) 3 months 7 years (31,500 documents) Refer to 14.2.6.HOW TO REMOVE THE THER-
MAL HEAD (P.142).
5 Platen Roller (Ref. No. 90) 3 months 7 years (31,500 documents) Refer to 14.2.7.HOW TO REMOVE THE
PLATEN ROLLER AND BACK COVER (P.143).
6 Pickup Roller (Ref. No. 96) 3 months 7 years (31,500 documents) Refer to 14.2.8.HOW TO REMOVE THE PICKUP
ROLLER (P.144).