manualshive.com logo in svg

Panasonic KX-FP701LA, Service Manual, Page: 95 / 207

Share
Download
Panasonic KX-FP701LA Service Manual Download Page 95

95

KX-FP701LA

12.3.2.1.7. How to record fax signal by using PC 

Recording FAX signal is one of the useful analysis measures to solve communication problems.
The way of recording easily by using PC is shown as follows.

1. Equipment

• 1 jig
• 1 PC (with LINE IN)
• 1 audio cord (mini jack supported)
• 2 tel cords

2. Setting up 

FAX SIGNAL RECORDING JIG

3. Connecting PC and JIG

4. PC setting and recording

1. Set LINE IN to be valid in the volume control setting.

Refer to the PC instruction book.

2. Start up the PC software “SOUND RECORDER”. (This software is bundled to Windows OS, which can create WAV file.)

Set the audio format “PCM 22.050kHz, 8bit, mono”.

3. Click the record button and start recording after acquisition the signal.

Note:

•  Not to be wind wave patterns on the wave monitor.
• Please compress the recording data when you send attaching to E-Mail because the data size will be so heavy.
• Any software which can create WAV files is available.

Parts No.

Parts Name & Descrip-

tion

Qt’y

PQJJ1T004Z

JACK1, JACK2

2

PQJJ1D010Z

PIN JACK

1

ECQE2155KF
 or
ECQE2E155KC

CAPACITOR

2

MA4020

DIODE

2

Summary of Contents for KX-FP701LA
















































































































































































































Reviews:

No comments