Panasonic KX-FP121 Page 110 Operating Instructions Manual Download

Page: 110 / 136

110

Jams

For assistance, call 1-800-435-7329.

Recording paper jam

If the unit does not eject any recording paper during reception or copying, the recording paper has jammed.
Remove the jammed paper by following this page or the next page.

The display will show the following message.

Display:

Remove the jammed paper as follows.

PAPER JAMMED

When paper has jammed under the film cartridge

Open the cover by pressing the cover open button.

Remove the film cartridge.

Replace the film cartridge by first placing the
“BACK” side of the cartridge into the unit and then
lowering the front of the cartridge into place.

Close the cover securely by pushing down on
both ends.

Remove the jammed recording paper.

If the film is slack, tighten it by winding the gears.

Film cartridge

Cover open
button

Gears

Film
cartridge

BACK

Incorrect

Correct

Tight

Summary of Contents for KX-FP121









































































































































Search results

Summary of Contents for KX-FP121

Reviews:

Related manuals for KX-FP121

Brands by name

Popular brands

Panasonic KX-FP121, Operating Instructions Manual

Search results

Summary of Contents for KX-FP121

Reviews:

Related manuals for KX-FP121

Brands by name

Popular brands