Panasonic KX-FLB882CX Operating Instructions Manual Download Page 17

Page: 17 / 108

2. Preparation

2 Preparation

Connections and Setup

2.1 Connections

Caution:

When you operate this product, the power outlet
should be near the product and easily
accessible.

Be sure to use the telephone line cord supplied
with this unit.

Do not extend the telephone line cord.

*1 The power cord or telephone line cord may differ

slightly. Use the appropriate power cord or telephone
line cord for where you use the unit.

Note:

If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device.

If you use the unit with a computer and your internet
provider instructs you to install a filter (

), please

connect it as follows.

A telephone handset cannot be connected directly to
this unit. To talk to the other party, please connect an
extension telephone.

Power cord

Connect to a power outlet
(220–240 V, 50/60 Hz).

Telephone line cord

Connect to a single telephone line jack.

[

EXT

]

jack

You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.

Answering machine (not supplied)

Network router/Network hub (not supplied)

Also connect networked computers.

To the internet

LAN cable (not supplied)

To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).

Important notice for the USB connection

Do NOT connect the USB cable until prompted by
the Multi-Function Station (page 24).

This model is designed to be used in Middle East,
Hong Kong, Malaysia, Asia, New Zealand, Africa
and Latin America according to the location
setting feature.

The default setting is Middle East. To change the
location setting, see page 55 (feature #114).

FLB882CX-PFQX2773ZB-OI-en.book Page 17 Friday, October 5, 2007 11:45 AM

Summary of Contents for KX-FLB882CX













































































































Search results

Summary of Contents for KX-FLB882CX

Reviews:

Related manuals for KX-FLB882CX

Brands by name

Popular brands

Panasonic KX-FLB882CX, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB882CX

Reviews:

Related manuals for KX-FLB882CX

Brands by name

Popular brands